Square Straight Hinged Steel Poles

The lighting standards listed here are designed for ground-mounted applications. Standards mounted on structures require factory consultation. All of our products are available as direct-burial poles — contact our Inside Sales team for exact catalog numbers and pricing of such poles.

 

Pole Shaft Specifications

The pole shaft’s two-section design is fabricated from United States standard coil stock. It is a weldable-grade, hot-rolled, commercial-quality carbon steel ASTM A-500 Grade B with a guaranteed minimum yield strength of 46,000 psi after fabrication. Each section is a one-piece construction with a full-length longitudinal resistance weld and is square in cross section.

Base Plate Cover

A full base plate cover is supplied. For 20-35′ poles, the base cover is automotive structural grade ABS plastic with a UV inhibitor to eliminate color fading. It is rust proof and tamper resistant. For 39-60′ poles, the base cover is made of two-piece formed sheet steel.

SSHP_LWLowering Winch

A portable lowering winch is required with hinged poles and should be ordered as a separate item.

 

 

Product Line

  • SSHP-20-4-7
  • 20
  • SSHP-20-5-7
  • 20
  • SSHP-24-4-7
  • 24
  • SSHP-24-6-7
  • 24
  • SSHP-30-4-7
  • 30
  • SSHP-30-6-7
  • 30
  • SSHP-35-6-7
  • 35
Catalog NumberMounting HeightEffective Projected AreaShaft DimensionsBase InfoBase PlateCutsheetTemplate
8090100120ButtTopAnchor Bolt DiameterBolt CircleSquareHeight
SSHP-20-4-72013.510.89.36.94 x 74 x 11.75 x 289.5100.75View View
SSHP-20-5-72024.419.315.29.45 x 75 x 111 x 4011111View View
SSHP-24-4-7249.57.76.13.84 x 74 x 11.75 x 289.5100.75View View
SSHP-24-6-72425.218.614.38.66 x 76 x 71 x 4011.5121View View
SSHP-30-4-7304.53.52.91.94 x 74 x 11.75 x 289.5100.75View View
SSHP-30-6-730191410.86.46 x 76 x 71 x 4011.5121View View
SSHP-35-6-73512.173.6N/A6 x 76 x 71 x 4011.5121View View

EPA ratings include a 1.3 gust factor.

Anchor bolts should be set using factory-supplied anchor bolt templates.

Vibration dampeners are suggested for poles 25′ and longer.

About Us

United Lighting Standards has been committed to designing, fabricating, finishing, and packaging high-quality steel and aluminum poles since 1971. We adhere to standards set forth by AASHTO, ASTM International, and NEMA. All of our products are built using fabricating and welding procedures outlined in the American Welding Society (AWS) manual for steel and aluminum to eliminate welding defects and ensure structural integrity.

Read more about ULS