Square Straight Hinged Aluminum Poles

The lighting standards listed here are designed for ground-mounted applications. Standards mounted on structures require factory consultation — contact our Inside Sales team for exact catalog numbers and pricing of such poles.

 

Pole Shaft

The shaft is extruded from all new 6063 alloy aluminum tubing and heat treated to produce a T6 temper. It is gracefully cone tapered to the butt diameter. These standards may be drilled to accept side arm mounted luminaires. Mounting orientation must be provided. An aluminum tenon may also be supplied as standard.

Hinged Base Casting

Cast from A356 alloy aluminum, the anchor base is heat treated to produce a T6 condition and inserted into the anchor base casting. The two pieces are joined by a continuous circumferential weld at the outside top and inside bottom of the anchor base. The base has a hinge pin to allow lowering of the pole to maintain luminaires.

 

Product Line

  • SSHA-481
  • 8
  • SSHA-4101
  • 10
  • SSHA-4121
  • 12
  • SSHA-4141
  • 14
  • SSHA-4151
  • 15
  • SSHA-4163
  • 16
  • SSHA-4181
  • 18
  • SSHA-5183
  • 18
  • SSHA-4203
  • 20
  • SSHA-5203
  • 20
Catalog NumberMounting HeightEffective Projected AreaShaft DimensionsBase InfoBase PlateCutsheetTemplate
8090100120Sq.Wall Thick.Anchor Bolt DiameterBolt CircleSquareHeight
SSHA-481813.810.88.4740.125.75 x 207.5 - 910.753.5View View
SSHA-41011010.68.36.34.240.125.75 x 207.5 - 910.753.5View View
SSHA-4121128.46.54.82.740.125.75 x 207.5 - 910.753.5View View
SSHA-4141146.85.13.71.540.125.75 x 207.5 - 910.753.5View View
SSHA-4151156.14.53.2140.125.75 x 207.5 - 910.753.5View View
SSHA-4163168.96.852.140.188.75 x 207.5 - 910.753.5View View
SSHA-4181184.43.12.1N/A40.125.75 x 207.5 - 910.753.5View View
SSHA-51831812.69.67.12.950.188.75 x 207.5 - 910.753.5View View
SSHA-4203206.34.63.2N/A40.188.75 x 207.5 - 910.753.5View View
SSHA-52032010.88.15.81.650.188.75 x 207.5 - 910.753.5View View

EPA ratings include a 1.3 gust factor.

Anchor bolts should be set using factory-supplied anchor bolt templates.

About Us

United Lighting Standards has been committed to designing, fabricating, finishing, and packaging high-quality steel and aluminum poles since 1971. We adhere to standards set forth by AASHTO, ASTM International, and NEMA. All of our products are built using fabricating and welding procedures outlined in the American Welding Society (AWS) manual for steel and aluminum to eliminate welding defects and ensure structural integrity.

Read more about ULS