Square Tapered Steel Poles

The lighting standards listed here are designed for ground-mounted applications. Standards mounted on structures require factory consultation. All of our products are available as direct-burial poles — contact our Inside Sales team for exact catalog numbers and pricing of such poles.

 

Pole Shaft Specifications

The pole shaft is fabricated from United States coil stock.  It is a weldable-grade, hot-rolled commercial quality carbon steel ASTM A-595 Grade A with a guaranteed minimum yield strength of 55,000 psi after fabrication. It is a one-piece construction with a full-length, longitudinal, high-frequency resistance weld and is square in cross section, having a uniform taper of approximately 0.10″ per foot in length.

Base Plate Cover

A full base plate cover is supplied. For 25′ and 30′ poles, the base cover is steel. For 20′, 25′, and 39′ poles, the base cover is made of two-piece formed sheet steel.

Product Line

  • STP-20-5211
  • 20
  • STP-25-6211
  • 25
  • STP-30-6211
  • 30
  • STP-35-6611
  • 35
  • STP-39-7111
  • 39
Catalog NumberMounting HeightEffective Projected AreaShaft DimensionsBase InfoBase PlateCutsheetTemplate
8090100120ButtTopWallAnchor Bolt DiameterBolt CircleSquareHeight
STP-20-52112014.411.69.46.65.253.25111 x 4010.011.001.00View View
STP-25-62112513.110.68.56.06.253.75111 x 4012.512.001.00View View
STP-30-6211308.97.25.84.06.253.25111 x 4012.512.001.00View View
STP-35-6611356.75.54.43.16.653.25111 x 4012.513.001.00View View
STP-39-7111395.94.83.82.77.153.25111 x 4012.513.001.00View View

EPA ratings include a 1.3 gust factor.

Anchor bolts should be set using factory-supplied anchor bolt templates.

Vibration dampeners are suggested for poles 25′ and longer.

About Us

United Lighting Standards has been committed to designing, fabricating, finishing, and packaging high-quality steel and aluminum poles since 1971. We adhere to standards set forth by AASHTO, ASTM International, and NEMA. All of our products are built using fabricating and welding procedures outlined in the American Welding Society (AWS) manual for steel and aluminum to eliminate welding defects and ensure structural integrity.

Read more about ULS